manualshive.com logo in svg

Yamaha tmax XP500A, Owner'S Manual

Share
Download
Yamaha tmax XP500A Owner'S Manual Download Page 76

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-29

 

1

2

3

4

5

6

7

8

9

 

necessary.

3. Fully charge the battery before in-

stallation.

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals.

CAUTION:

 

 ECA10630

 

●

 

Always keep the battery
charged. Storing a discharged
battery can cause permanent
battery damage.

 

●

 

To charge a sealed-type (MF)
battery, a special (constant-volt-
age) battery charger is required.
Using a conventional battery
charger will damage the battery.
If you do not have access to a
sealed-type (MF) battery charg-
er, have a Yamaha dealer

 

charge your battery.

 

EAU45042

 

Replacing the fuses 

 

The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located under panel B. (See
page 6-7.)

1. Remove panel B. (See page 6-7.)
2. Remove the rubber cover shown

by removing the quick fasteners.

If a fuse is blown, replace it as follows.

1. Turn the key to “OFF” and turn off

the electrical circuit in question.

2. Remove the blown fuse, and then

install a new fuse of the specified
amperage.

 

1. Quick fastener
2. Rubber cover

2

1

1

 

1. Main fuse
2. Spare main fuse

1. Fuse box
2. ABS solenoid fuse
3. ABS motor fuse

1

2

1

3

2

Summary of Contents for tmax XP500A

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands