manualshive.com logo in svg

Yamaha tmax XP500A, Owner'S Manual

Share
Download
Yamaha tmax XP500A Owner'S Manual Download Page 44

 

OPERATION AND IMPORTANT RIDING POINTS

 

5-2

 

1

2

3

4

5

6

7

8

9

 

●

 

Engine trouble warning light

 

●

 

ABS warning light (for ABS
models)

 

●

 

Immobilizer system indicator
light

 

●

 

V-belt replacement indicator

 

●

 

Oil change indicator

If a warning light, indicator light or
indicator does not go off, see page
3-3 or 3-6 for the corresponding
warning light, indicator light or indi-

 

cator circuit check.

 

2. Close the throttle completely.
3. Start the engine by pushing the

start switch while applying the front
or rear brake.

NOTE:

 

If the engine does not start, release the
start switch, wait a few seconds, and
then try again. Each starting attempt
should be as short as possible to pre-
serve the battery. Do not crank the en-
gine more than 10 seconds on any one

 

attempt.

CAUTION:

 

 ECA11040

 

For maximum engine life, never ac-

celerate hard when the engine is

 

cold!

 

EAU45091

 

Starting off 

 

1. While pulling the rear brake lever

with your left hand and holding the
grab bar with your right hand, push
the scooter off the centerstand.

2. Sit astride the seat, and then ad-

just the rear view mirrors.

3. Switch the turn signals on.
4. Check for oncoming traffic, and

then slowly turn the throttle grip (on
the right) in order to take off.

5. Switch the turn signals off.

 

1. Grab bar

1

Summary of Contents for tmax XP500A

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands