manualshive.com logo in svg

Yamaha tmax XP500A, Owner'S Manual

Share
Download
Yamaha tmax XP500A Owner'S Manual Download Page 65

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-18

 

2

3

4

5

6

7

8

9

 

EAU33482

 

Adjusting the engine idling 
speed 

 

The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.

1. Remove panel F. (See page 6-7.)
2. Check the engine idling speed

and, if necessary, adjust it to spec-
ification by turning the idle adjust-
ing screw. To increase the engine
idling speed, turn the screw in di-
rection (a). To decrease the en-
gine idling speed, turn the screw in
direction (b).

NOTE:

 

If the specified idling speed cannot be
obtained as described above, have a

 

Yamaha dealer make the adjustment.

3. Install the panel.

 

EAU21382

 

Checking the throttle cable 
free play 

 

The throttle cable free play should mea-
sure 3.0–5.0 mm (0.12–0.20 in) at the
throttle grip. Periodically check the
throttle cable free play and, if neces-
sary, have a Yamaha dealer adjust it.

 

1. Idle adjusting screw

 

Engine idling speed:

 

1100–1300 r/min

1

(a)

(b)

 

1. Throttle cable free play

1

Summary of Contents for tmax XP500A

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands