Yamaha tmax XP500A Owner'S Manual Download

Page: 39 / 96

INSTRUMENT AND CONTROL FUNCTIONS

3-23

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.

Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.

Does the engine start?

With the engine still running:
9. Move the sidestand down.

Does the engine stall?

The system is OK.

The scooter can be ridden.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The brake switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

YES

Summary of Contents for tmax XP500A

































































































Search results

Summary of Contents for tmax XP500A

Reviews:

Related manuals for tmax XP500A

Brands by name

Popular brands

Yamaha tmax XP500A, Owner'S Manual

Search results

Summary of Contents for tmax XP500A

Reviews:

Related manuals for tmax XP500A

Brands by name

Popular brands