Yamaha TF1, Service Manual

Page: 136 / 372

TF5/TF3/TF1
136
6-2-4. Example of Sending Commands
1) Starts TeraTerm, and connect it to TF. 2) Transmit command “PRODUCT_UNKNOWN” to TF.
●
List of check items
No. Item Sub Item
Description
Judge-
ment
TOTAL
MEAS-
UREMEN
Remarks
1 VERSION
VER_BOOT
Boot program version check Manual
○ –
VER_KERNEL
Kernel program version check Manual
○ –
VER_MAIN
Main program version check Manual
○ –
VER_MAINCOM
MAINCOM circuit board version check Manual
○ –
VER_SUB_PIC
PIC SubCPU version check Manual
○
–
VER_SUB_PNC
PNC SubCPU version check Manual
○ –
VER_SUB_PNFD1
PNFD SubCPU version check on PNFDCOM circuit board
Manual
× –
This is not tested as part of the service. When testing, conduct a PNFDCOM
circuit board test.
VER_SUB_HA1
HA SubCPU version check on HACOM circuit board
Manual
× –
This is not tested as part of the service. When testing, conduct a HACOM
circuit board test.
MAC_ADDRESS
Mac address check Auto
○ –
PRODUCT_TYPE
Product type (TF1/3/5) check Semi Auto
○ –
2 CPU PORT
RTC
RTC connection check Auto
○
–
USB_CONNECT
USB terminal connection check
Auto
○ –
USB memory is required.
PNC_CONNECT
PNC SUB CPU connection check Auto
○ –
PNFD_CONNECT
PNFD8 SUB CPU connection check Auto
○ –
FSW
FOOT SWITCH connection check
Semi Auto
○
–
Foot switch (YAMAHA FC4 or jig ※ ) is required.
ETHER
Ether cuircuit check
Manual
○ –
PC and Ethernet cable are required.
BATT
Battery voltage check Auto
○ –
3 CPLD
CPLD_CONNECT
CPLD connection check Auto
○ –
CPLD_CLK
CPLD clock check Auto
○
–
CPLD_MUTE
CPLD –> DSP mute connection check Auto
○ –
PLL
PLL lock/unlock check Auto
○ –
4 SLOT
It inspects using SLOT jigs for the inspection
Contents of the test are currently undecided.
Semi Auto
○ –
The SLOT test jig is not yet in production, but is planned for future
production, so it is not subject to the test.
※○ : Execution × : Nonexecution