Yamaha TF1, Service Manual

Page: 132 / 372

TF5/TF3/TF1
132
S
Each inspection screen
q
r
w
t
e
If each inspection screen is started from the starting screen, the screen as shown in the above fi gure will be displayed.
(The above fi gure is an example of product inspection screen.)
Push the
[PLAY]
button to start the automatic inspection sequence. After that operate the mixer according to direction
of the screen.
When the inspection sequence is completed, a comprehensive judgment is displayed on the upper left of a screen by
“PASS” or “FAIL”.
q
Comprehensive judgment
The comprehensive result of the whole inspection is
displayed by “PASS” or “FAIL”.
w
[CLOSE] button
Each inspection screen is closed and it returns to the
starting screen.
It can also substitute pushing
"USER DEFINED KEYS"
[B]
switch.
e
Item selection macroscopic buttons
[ALL]
All the items are chosen.
[CLEAR]
All the items are out of selection.
[DEFAULT]
It returns to the default selection.
r
[SAVE DATA] button
The test log will be saved to USB memory with the fi le
name “DiagLog.txt”.
t
Transport buttons
The automatic inspection sequence is operated by using
these buttons.
Push the
[PLAY]
button to start the automatic inspection
sequence.
The buttons are displayed as follows during the inspection
sequence.
When interrupting the sequence, push the
[PAUSE]
button.
The buttons are displayed as follows during discontinuation.
Push the
[PLAY]
button to resume the sequence.
Push the
[STOP]
button to terminate the sequence.
It can also substitute pushing
"USER DEFINED KEYS"
[D]
switch and
"USER DEFINED KEYS" [E]
switch.