background image

 

TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide

 

 

1

 

 

TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide 

 

Thank you for choosing a Yamaha product. 
This guide explains how to update the TF series (TF5, TF3, TF1 and TF-RACK) and the NY64-D firmware. 
 

 Precautions (Please be sure to read this section first!) 

 

The user assumes full responsibility for the update. 

 

Please note that the device may be damaged if you fail to follow these instructions properly, or turn off 

the device or operate any control/function while the update is in progress.   

 

If the update fails, and the device still does not operate correctly even after you execute the update once 

again, please contact your Yamaha dealer.   

 

Yamaha Corporation owns exclusive copyrights for the TF series firmware, its update program, and the 

update guide.   

 

It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without 

permission from the copyright owner. 

 

The screen shots in this guide are for use with this update procedure only and may be different from the 

actual screen shots.   

 

The company names and product names in this document are the trademarks or registered trademarks of 

their respective companies. 

 
 
 
 
 
 
 

Summary of Contents for TF Series













Reviews: