22. Attach the lower crossbar on the pedal rod assembly to
the T-CHIME with the screws from the concert frame.
There is a screw on each side.
23. Attach both lower cross bars onto the T-CHIME tube
posts with the screws from the concert frame.
24. Replace the damper box over the top of each tube post.
Ensure the side of the box with the damper stop is on the
player side. Slide the damper box down slowly and evenly
on both sides.
25. Replace the four screws under the damper box (two
on each side). Both will attach to a plate on the side
tube post.
26. Place the upper chime frame onto each top post.
27. Firmly attach the frame with the two screws provided
(one on each side).
22.
23.
24.
25.
26.
27.
Yamaha T-CHIME Assembly Guide V1.0 - March 2021
Page 5 of 6
27.
