10. Using the hex key included with the concert chimes,
remove the screw at the top of the upper chime frame.
Ensure the safety of screws until the frame is put back
together.
11. Remove the upper chime frame by sliding it up and out
of the entire concert frame. Place it on a soft surface.
12. Using the hex key, loosen the screw that attaches the
pull rod to the damper box attachment. Disconnect the
damper rod from the damper box and set it aside.
13. There are two screws attached to the plate under the
damper box on each side of the concert frame. Using
the hex key, remove each of the four screws, and set
them aside for later use.
14. The damper box is now disconnected from the concert
frame. Remove the damper box by sliding it up and out
of the concert frame.
15. There is a screw that attaches the lower crossbars to the
underside of the damper box. Loosen each screw with a
hex key and put it aside in a safe place for reassembly.
10.
11.
12.
13.
14.
15.
Yamaha T-CHIME Assembly Guide V1.0 - March 2021
Page 3 of 6