16. Remove the screw that attaches each tube post to the
wheel assembly with a hex key. There is one on each
side. Put the screws in a safe place for reassembly.
17. Remove each vertical tube post from the concert frame.
18. Place both tube posts in the T-CHIME frame. Do not fully
tighten the screws on each side yet. Save that for the end
as it is helpful to have a little give during the assembly
process.
19. Loosen the screw located at the bottom on each side
of the concert frame. Put the screws in a safe place
for reassembly.
20. Remove the pedal rod assembly from the concert frame.
21. Place the pedal rod assembly on the T-CHIME frame.
The pedal should be facing the player with the T-handle
on the player’s left-hand side.
16.
17.
18.
19.
20.
21.
Yamaha T-CHIME Assembly Guide V1.0 - March 2021
Page 4 of 6