4. Next, place the low-end wheel assembly with swivel
wheels on the ground.
5. Insert the long lower cross bar into both wheel assem-
blies to attach them together. Finger tighten the screws.
Do not fully tighten the screws in each wheel assembly
just yet. Save that for the end, as it is helpful to have a
little give during the assembly process.
6. Attach the T-handle to the low-end wheel assembly using
the hex key provided in the T-CHIME box. Lock the swivel
casters when completed.
7. Now that the base of the T-CHIME is complete,
prepare to attach the YCH-6018 or YCH-7018
components to the T-CHIME frame.
8. Lock the wheels of the chime frame to avoid any
movement during disassembly.
9. Carefully remove all chime tubes. To avoid damage, lay
them down on a soft, level surface such as a blanket. If the
concert chimes are not already assembled, go to step #11.
Use care to not leave scratches when removing each tube
from the frame. Wearing soft gloves is recommended.
4.
5.
6.
7.
8.
9.
Yamaha T-CHIME Assembly Guide V1.0 - March 2021
Page 2 of 6