manualshive.com logo in svg

Yamaha SY85, Owner'S Manual

Share
Download
Yamaha SY85 Owner'S Manual Download Page 48

8. 

Select and Set the Main Effect Parameters

Use the PAGE

and

keys to locate the “QED EF PARAM” screen.

This screen provides access to the four main parameters each for the current

selected effect 1 and effect 2. The four effect 1 parameters are edited via [CS1]
through [CS4], while the four effect 2 parameters are edited via [CS5] through

[CS8]. The name of the corresponding effect and parameter are shown on the

upper display line when one of these parameters are edited.

The parameters are different for each effect (refer to page 274 of the Fea-

ture Reference manual for details).

9. 

Play

Try playing your new voice on the keyboard (of course, you can play at

any time while editing to hear how it’s progressing).

The COMPARE function lets you compare the sound of the edited voice

with that of the original voice. To engage the COMPARE mode, press the

[STORE] key while holding the [SHIFT] key. The [VOICE] key indicator

will flash and you’ll hear the original pre-edit voice when you play on the

keyboard.

Press the [EXIT/NO] key to exit from the COMPARE mode and return

to the edited data.

10. 

Store Your New Voice

Once you’re satisfied with the sound of your original voice, you can store it

to an internal voice memory location as follows:

Press the [STORE] key.

Select the voice memory location to which you want to store your new

voice using any standard voice, selection procedure (e.g. MEMORY, GROUP,
and PROGRAM keys).

4. Voice Editing & Effects

45

Summary of Contents for SY85









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands