manualshive.com logo in svg

Yamaha SY85, Owner'S Manual

Share
Download
Yamaha SY85 Owner'S Manual Download Page 266

11: REMOVE EVENT

Allows pitch bend, after touch, program change, or control change events (data) to

be removed from a specified measure or range of measures in a specified track.

This job is not available when the rhythm track (track 9) is selected.

Event (Event type & No. if "ctrl" selected)

Range: PB, AT, crtl, pgm
Controls: [CS5], [CS6], [-1] [+1], Dial

Meas (First & last measure numbers)

Range: 001 ... 999

Controls: [CS7], [CS8], [-1] [+1], Dial

Use the GROUP [A] through [H] keys to select the track containing the

measures from which you want to remove events (A = track1, B = track 2, and
so on). The LED of the selected track will glow red while the LEDs of all
other tracks containing data glow green.

Use [CS5] to select the type of event to remove: “ctrl” for control change,

“pgm” for program change, “AT” for aftertouch, and “PB” for pitch bend.
Removing a program change (“pgm”) event also removes control change
number 0 and 32 (bank select). If “ctrl” is selected, [CS6] can be used to

specify a control number to be removed (see below). Use the [CS7] and [CS8]
sliders to select the numbers of the first and last measures in the range of

measures from which the specified event data is to be removed.

Press [ENTER/YES] to begin the remove event procedure. The following

confirmation display will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

remove event operation, or press [EXIT/NO] to cancel.

When the data has been removed, “Completed!” will appear briefly on the

display.

SONG EDIT MODE / 

SONG JOB 

193

Summary of Contents for SY85









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands