manualshive.com logo in svg

Yamaha SY85, Owner'S Manual

Share
Download
Yamaha SY85 Owner'S Manual Download Page 33

The SY85 PERFORMANCE mode makes it possible to combine up to four

voices in “performance combinations” that significantly enhance the instru-
ment’s performance capabilities. 128 performance combinations can be stored in
internal memory and recalled in the same way as the voices. Before we look at
how you can create your own performance combinations, try selecting and
playing some of the combinations provided with the SY85.

n 

Play the Internal Performance Combinations

The SY85 can access three different performance memories - INTERNAL

1, INTERNAL 2, and CARD.

1.

Select the Performance Mode

Press the [PERFORMANCE] key so that its indicator lights and the words

“PERFORMANCE PLAY” appear on the top line of the LCD panel.

The information displayed on the bottom display line tells you

about the current effect mode and what effects are assigned to

the SY85’s two effect processors. See the “Effects” section
beginning on page 254 of the Feature Reference manual for

more details.

2. 

Select an Internal Performance Memory

In the PERFORMANCE mode, each INTERNAL memory key accesses a

single bank of 64 performance combinations.

[INTERNAL 1]

.................

Internal performance bank 1.

[INTERNAL 2]

Internal performance bank 2.

3.

...................

Select a Performance Combination

After selecting an internal performance bank, you can select any of the 64

performance combinations it contains in exactly the same way as you select

voices. See page 21 for voice selection details.

30 

3. The Performance Mode

Summary of Contents for SY85









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands