Yamaha SY55, Product Manual

Page: 58 / 197

8. When the copy operation has finished, the SY55
will return automatically to. the display that was
showing immediately prior to activation of the
element copy function.
The Effect Copy Function
The Effect Copy function makes it possible to
copy the effect parameter assignments from any
other voice or multi-timbral setup to the voice cur-
rently being edited.
1. Make sure the voice edit mode is engaged and
that one of the EFFECT functions is selected.
2. Press the [STORE/COPY] key. The following dis-
play will appear.
5. Press the [ENTER] key. "Sure?" will appear on
the top line of the LCD.
6. Press the [+1/YES] key to confirm and actually
execute the copy operation, or [-1/NO] to cancel.
"Executing! will appear briefly on the display
while the data is being copied, then "Com-
pleted!" will appear for a few seconds when the
copy operation has been successfully completed.
3. Use the
4. Next, move the cursor to the multi or voice num-
and cursor keys to move to the
Multi/Voice parameter and select "Multi" if you
want to copy the effect parameters from a multi-
timbral setup, or "Voice" if you want to copy the
effect parameters from a preset or internal voice.
ber parameter by pressing the key, and se-
lect the multi-timbral setup or voice from which
the parameter data is to be copied by using the
[DATA ENTRY] control, [-1/NO] and [+1/YES]
keys, or numeric and [ENTER] keys. The [INTER-
NAL], [CARD], or [PRESET] key can be used to
select the "P" (preset) or "I" voice bank if nec-
essary.
7. When the copy operation has finished, the SY55
will return automatically to the display that was
showing immediately prior to activation of the
effect copy function.
56