Yamaha SY55 Product Manual Download Page 22

Page: 22 / 197

TUTORIALS

3. THE MULTI PLAY MODE

MULTI PLAY Setups

The SY55 MULTI PLAY (multi-timbre) mode allows different voices to

be assigned to up to 16 different MIDI channels. This allows you to record

and play multi-voice compositions using the SY55's internal 8-track se-
quencer, or an external sequencer if desired.

Here's an example — the preset "POP" multi-play setup (MULTI P01):

MULTI P01: POP instruments and channel assignments

Channel-1 voice Pick Bass
Channel-2 voice Deep Organ
Channel-3 voice Trumpet
Channel-4 voice Saxophone
Channel-5 voice off
Channel-6 voice off

Channel-7 voice off
Channel-8 voice Drum Set 2
Channel-9 voice off

Channel-16 voice: off

In addition to 16 PRESET MULTI PLAY setups including the one de-

scribed above, 16 INTERNAL memory locations are provided for complete
"MULTI PLAY" setups including voice-to-channel assignments, individual

voice volume, note shift, tuning, panning, and effects. This allows you to
create up to 16 original "orchestras" with different combinations of voices
that can be recalled whenever needed. MULTI PLAY setups can also be

stored on external memory cards in the same way as ordinary voices.

1 9

Summary of Contents for SY55






































































































































































































Search results

Summary of Contents for SY55

Reviews:

Related manuals for SY55

Brands by name

Popular brands

Yamaha SY55, Product Manual

Search results

Summary of Contents for SY55

Reviews:

Related manuals for SY55

Brands by name

Popular brands