Yamaha SY55, Product Manual

Page: 57 / 197

VOICE EDIT MODE
The Element, AEG and Filter Copy Functions
The Element, AEG and Filter Copy functions
make it possible to copy all parameter assignments,
just the AEG parameter assignments, or just the fil-
ter parameter assignments from any other element to
the element currently being edited. This is useful if,
for example, you want to create an AEG curve that
is the same as, or varies only slightly from, one that
already exists.
1. Make sure the voice edit mode is engaged and
that any function other than one of the EFFECT,
AEG or FILTER functions is selected if you
want to copy all element parameters, that one of
the AEG functions is selected if you want to
copy the AEG parameters, or that one of the
FILTER functions is selected if you want to copy
the filter parameters.
2. Select the element to which the new parameter
data will be copied using the standard element
selection procedure described above.
3. Press the [STORE/COPY] key. One of the follow-
ing displays will appear, depending on the cur-
rently selected function.
5. Move the underline cursor to the element pa-
rameter to the right by pressing the key,
then choose the particular element of the se-
lected voice you want to copy the data from
using the [DATA ENTRY] control or [+1/YES]
and [-1/NO] keys.* If the element number ap-
pears in reverse, the voice does not use that
element and no data is available.
* For Filter Copy, the "editbuf" setting allows
copying parameters from filter 1 to filter 2, or
vice versa, when copying within the same ele-
ment (e.g. EL1 EL1). In this case, the filter
to be copied to must be selected prior to
pressing [STORE/COPY] key by holding the
[SELECT] key and pressing either the numeric
[9] or [6] key. "F
2
F
1
" or "F
1
F
2
" will ap-
pear on the upper line of the display to show
the selected copy direction.
6. When the elements to and from which the data is
to be copied have been properly selected, press
the [ENTER] key. "Sure?" will appear on the top
line of the LCD.
4. Next, select the voice from which the parameter
data is to be copied by using the [DATA ENTRY]
control, [-1/NO] and [+1/YES] keys, or numeric
and [ENTER] keys. "editbuf" refers to the voice
that is currently being edited, and other voices
can be selected by using standard procedure —
[INTERNAL], [CARD], or [PRESET] key to select
voice bank; [DATA ENTRY] control, [-1/NO] and
[+1/YES] keys, or numeric and [ENTER] keys to
select the voice.
7. Press the [+1/YES] key to confirm and actually
execute the copy operation, or [-1/NO] to cancel.
"Executing! will appear briefly on the display
while the data is being copied, then "Com-
pleted!" will appear for a few seconds when the
copy operation has been successfully completed.
55