Yamaha SY55, Product Manual

Page: 29 / 197

The MULTI PLAY memory number on the top line indicates the
source setup — i.e. "Jazz Quart," the setup we just created. The MULTI
PLAY number after the arrow on the bottom line is the target setup — i.e.
the memory location to which we will store the edited setup.
2. The target memory location can be changed by using the [DATA ENTRY]
control, [+1/YES] and [-1/NO] keys, or numeric and [ENTER] keys. The
[INTERNAL] and [CARD] keys can be used to change banks, if necessary
(obviously you can't store to the read-only PRESET bank, or to a card if
no card is loaded).
3. When you're satisfied with the target memory location selection, press
[ENTER].
"Sure?" appears on the top line of the display, asking you to confirm
you intention to store to the selected target location. This confirmation
step is important because once you store, all previous data in the target
location is erased and completely replaced by the new data.
4. Press [+1/YES] to confirm and actually execute the store operation, or [-1/
NO] to cancel. "Executing!" will appear on the display during store, and
"Completed!" will appear briefly when the store operation is finished.
Your "Jazz Quart" MULTI PLAY setup has now been stored and can
be recalled whenever needed!
Note: See the ERROR MESSAGES section on page 144 for information
on memory-card related error messages.
Conclusion If you've gone all the way through this section and followed all the
instructions, you've actually done much more than program your first MULTI
PLAY setup. You've learnt about many of the most important SY55 program-
ming procedures and, as a result, should find the next tutorial easy to handle.
There are a few functions and features of the MULTI PLAY mode that we
haven't looked at in this tutorial. Refer to the "REFERENCE" section for
details.
26