Yamaha SY.22, Authorized Product Manual

Page: 66 / 101

MULTI
Summary: Assigns a name of up to 8 characters to
the current multi-play setup.
Settings: The following characters are available for
use in multi-play names:
Procedure: Use the [ ] and [ ] cursor keys to
(Space)
Summary: Selects one of sixteen digital effects, and
sets the depth of the selected effect for the cur-
rent multi-play setup.
Settings: Effect type:
Rev Hall (Reverb Hall)
Rev Room (Reverb Room)
Rev Plate (Reverb Plate)
Rev Club (Reverb Club)
Rev Metal (Reverb Metal)
Delay 1 (Short Single Delay)
Delay 2 (Long Delay)
Delay 3 (Long Delay)
Doubler (Doubler)
Ping-Pong (Ping Pong Delay)
Pan Ref (Panned Reflections)
Early Ref (Early Reflections)
Gate Rev (Gated Reverb)
Dly&Rev 1 (Delay & Reverb 1)
Dly&Rev 2 (Delay & Reverb 2)
Dist&Rev (Distortion & Reverb)
place the underline cursor under the character to
be changed. Use the [-1/NO] and [+1/YES]
keys to select the desired character. Continue
until the entire multi-play name has been
programmed.
Details: It's a good idea to give your multi-play se-
tups names that make them easily identifiable.
If you've created a new setup using three voices
intended for rock music, you could call it some-
thing like "RockTrio".
Depth: 0... 7
place the underline cursor under the effect type
or depth parameter. Use the [-1/NO] and
[+1/YES] keys to select the desired effect or
effect depth.
Details: Setting the depth parameter to "0" is
equivalent to turning the effect OFF. A depth
setting of "7" produces the greatest effect.
Refer to: MULTI INITIALIZE, page 72.
Procedure: Use the [ ] and [ ] cursor keys to
62
Summary: Assigns a preset, card or internal voice
to the selected multi-play part.