Yamaha SY.22, Authorized Product Manual

Page: 58 / 101

ELEMENT ENVELOPE
Summary: Copies envelope parameters from a
selected element to the current element.
Settings: Element: A, B, C, D
Procedure: Use the [ ] and [ ] cursor keys to
move the cursor to the from"element
parameter. Use the [-1/NO] and [+1/YES] keys
to select the element from which the envelope
data is to be copied.
Summary: Sets a delay before the envelopes of all
elements begin.
Settings: Delay: 0 ... 99
Mode: on/off
Procedure: Use the [ ] and [ ] cursor keys to
move the cursor to the "Rate" parameter. Use
Summary: Sets the starting level of the amplitude
envelope for the current element.
Settings: 0... 99
Procedure: Use the [ ] cursor key to move the cur-
sor to the lower display line. Use the [-1/NO]
and [+1/YES] keys to set the initial level.
Details: A setting of "0" means that the envelope
will begin from zero (minimum) level, while a
setting of "99" causes the envelope to begin
54
Press the [ ] cursor key one more time and the
"Are you sure?" display will appear. Press
[+1/YES] to execute the copy operation or
[-1/NO] to cancel. "»Completed!!«" will
appear briefly when the copy operation has
finished.
Details: This function can save a lot of programming
time by allowing easy copying of complex USER
type envelope data between elements.
the [-1/NO] and [+1/YES] keys to select the
desired delay rate.
Press the[
] cursor key one more time to move
to the on/off mode parameter, and use the
[-1/NO] and [+1/YES] keys to set as required.
Details: The envelope delay rate parameter affects
all envelopes simultaneously. A setting of "0"
produces almost no delay while a setting of
"99" produces maximum delay.
immediately from maximum level. The highest
setting produces the sharpest attack.
Refer to: ENVELOPE, page 33.