3
O
PERATION
3-28
5) Remove hull drain plug
and the
engine compartment drain plug
.
Rinse the engine compartment with
a small amount of fresh water. Be
careful not to get water on the carbu-
retor or electrical components. Allow
any water in the bilge to drain out.
After the water has drained, wipe the
engine compartment and bilge with
dry rags. Check the condition of the
hull drain plug O-ring and replace
if necessary.
NOTICE:
Water can
enter the boat if the drain plug
O-ring is damaged or missing.
Reinstall all drain plugs.
Tighten the hull drain plug
secure-
ly before launching the boat. Clean
any foreign material, such as dirt or
sand, from the threads before install-
ing the drain plug.
6) Spray a rust inhibitor, such as
Yamaha Silicone Protectant and
Lubricant, on metallic parts to mini-
mize corrosion.
