3-11
O
PERATION
3
Overheating and serious damage
could occur. See Overheat Warning
System, page 2-13, for more informa-
tion.
BIMINI TOP (SX210 MODEL)
Raising from the fully collapsed storage
position.
1) Raise the top and secure the rear
support poles to the rear support
pole mounts with the lock pins.
2) Unzip and remove the storage cover.
3) Unfold the top by pulling to the bow
of the boat.
4) Attach the snap hooks to the strap
eyes.
5) The top should be snug and wrinkle
free. If the top is too loose or too
tight, adjust the front straps by slid-
ing the buckle up or down the strap
as needed.
Do not exceed 45 mph (72 km/h) with
the Bimini top in the up position.
Storing
In the Upright Position
1) Unhook the front straps and pull the
top to the back.
2) Roll the fabric around the frames
and zip the storage cover in place.
Do not trailer the boat with the Bimini
top in the fully extended or upright
storage position. Put the cover in
the fully collapsed position to avoid
damage.
