#
S
AFETY
I
NFORMATION
2-22
Short Tower Storage Support
Raising
1) While an assistant holds the upper
tower section in the middle, remove
the knobs from the top end of the
short tower storage supports on
each side.
2) Remove the inboard-side knobs
from the bottom end of the short
tower storage supports. Remove the
storage supports.
3) Have the assistant raise the upper
tower section to the raised posi-
tion. Rotate the tower supports for-
ward (install them first if they were
removed) until the upper mounting
hole on each side lines up with the
hole in the tower.
4) Install the upper knobs on both
sides, but leave them slightly loose.
5) Install the inboard-side knobs to the
bottom supports, but leave them
slightly loose. Once all supports and
knobs are in place, tighten all knobs
securely. Also make sure that the
upper tower pivot point mounting
bolt is securely fastened.
6) Install any accessories removed for
storage, such as wakeboard racks.
Store the short tower supports in a
secure location for the next use.
2
F
EATURES
&
F
UNCTIONS
