Yamaha Stratoliner Owner'S Manual Download Page 83 | Manualshive

Page: 83 / 100

background image

MOTORCYCLE CARE AND STORAGE

7-3

7

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted and chrome-plat-

ed surfaces. Avoid combination
cleaner waxes, many of which
contain abrasives that may mar
the paint or protective finish.

7. Let the motorcycle dry completely

before storing or covering it.

WARNING

EWA11130

●

Make sure that there is no oil or
wax on the brakes or tires.

●

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cor-
nering behavior.

CAUTION:

ECA10950

●

Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.

●

Never apply oil or wax to the
drive belt.

●

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

●

Avoid using abrasive polishing
compounds as they will wear
away the paint.

NOTE:

Consult a Yamaha dealer for advice on
what products to use.

Special care is needed for cleaning
the windshield and sidebags on this
model. Be sure to follow the instruc-
tions below.

Cleaning the windshield
Avoid using any alkaline or strong acid
cleaner, gasoline, brake fluid, or any
other solvent. Clean the windshield with
a cloth or sponge dampened with a
neutral detergent, and after cleaning,
thoroughly wash it off with water. For
additional cleaning, use Yamaha Wind-
shield Cleaner or other quality cleaner.
Some cleaning compounds for plastics

may leave scratches on surfaces of the
windshield. Before using them, make a
test by polishing an area which does
not affect your visibility.

Cleaning the sidebags
Water can be harmful to untreated
leather. Use Yamaha Saddle Soap or
another quality brand according to the
manufacturer’s directions to clean the
leather on the sidebags. Polish the dry
leather with a soft cloth, and then treat
with Yamaha Mink Oil or another high-
quality leather protectant for increased
water resistance.

U2C511E0.book Page 3 Friday, July 14, 2006 2:51 PM

«
...
81
82
83
84
85
...
»

Summary of Contents for Stratoliner





































































































Reviews:

No comments

Related manuals for Stratoliner

Brand: Idaho Pages: 72

Brand: Yamaha Pages: 662

Brand: Yamaha Pages: 88

Brand: R&G Pages: 12

Brand: Memphis Shades Pages: 2

Bonneville T100

Brand: Triumph Pages: 198

Brand: LAZER Pages: 11

Brand: X-lite Pages: 33

Brand: Zero Pages: 290

TMAX ABS Series

Brand: Yamaha Pages: 122

Tenere 700 2024

Brand: Yamaha Pages: 110

TRACER MTT9K 2019

Brand: Yamaha Pages: 122

TT-R125(N) 2000

Brand: Yamaha Pages: 508

TT-R125(R) 2002

Brand: Yamaha Pages: 510

Brand: Yamaha Pages: 610

TT-R125(S) 2003

Brand: Yamaha Pages: 610

Brand: Yamaha Pages: 616

Brand: Yamaha Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands