PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
NOTE:
Skip steps 7–9 if the oil filter cartridge is
not being replaced.
7. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
An oil filter wrench is available at a
Yamaha dealer.
8. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
Make sure that the O-ring is properly
seated.
9. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
10. Install the engine oil drain bolts,
and then tighten them to the spec-
ified torque.
1. Oil filter cartridge
2. Oil filter wrench
1. O-ring
1. Oil filter cartridge
2. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
Tightening torques:
Engine oil drain bolt A (crankcase):
43 Nm (4.3 m·kgf, 31 ft·lbf)
Engine oil drain bolt B (crankcase):
43 Nm (4.3 m·kgf, 31 ft·lbf)
Engine oil drain bolt (oil tank):
43 Nm (4.3 m·kgf, 31 ft·lbf)
U2C511E0.book Page 11 Friday, July 14, 2006 2:51 PM
Summary of Contents for Stratoliner
Page 1: ...2C5 28199 11 XV19CTSW C XV19CTW C XV19CTMW C OWNER S MANUAL LIT 11626 20 41 ...
Page 2: ...EAU10041 U2C511E0 book Page 1 Friday July 14 2006 2 51 PM ...
Page 14: ...SAFETY INFORMATION 1 6 1 U2C511E0 book Page 6 Friday July 14 2006 2 51 PM ...
Page 100: ...PRINTED IN JAPAN 2006 07 0 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...