Yamaha Stratoliner Owner'S Manual Download Page 77

Page: 77 / 100

PERIODIC MAINTENANCE AND MINOR REPAIR

6-30

3. Connect the headlight coupler.

Installing the headlight unit

1. Install the headlight unit by install-

ing the screws.

2. Connect the coupler to the main

switch/steering lock cover.

3. Install the main switch/steering

lock cover by installing the bolts.

4. Install the windshield.
5. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU24180

Tail/brake light

This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.

EAU38380

Replacing a turn signal light
bulb

1. Remove the turn signal light lens

by removing the screw, and then
turning the lens counterclockwise.

2. Remove the defective bulb by

pushing it in and turning it counter-
clockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by turning it clock-

wise, and then installing the screw.

CAUTION:

ECA11190

Do not overtighten the screw, other-
wise the lens may break.

1. Screw

U2C511E0.book Page 30 Friday, July 14, 2006 2:51 PM

Summary of Contents for Stratoliner





































































































Search results

Summary of Contents for Stratoliner

Reviews:

Related manuals for Stratoliner

Brands by name

Popular brands

Yamaha Stratoliner, Owner'S Manual

Search results

Summary of Contents for Stratoliner

Reviews:

Related manuals for Stratoliner

Brands by name

Popular brands