Yamaha Stratoliner Owner'S Manual Download Page 32

Page: 32 / 100

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3. Place the helmet on the left side of

the vehicle, and then install the rid-
er seat.

CAUTION:

ECA15330

Be sure to place the helmet on the
left side of the vehicle. Some hel-
mets may contact the muffler when
placed on the right side because of
their size or shape.

WARNING

EWA10160

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

To release the helmet from the hel-
met holder

Remove the rider seat, remove the hel-
met holding cable from the helmet hold-
er and the helmet, and then install the
seat.

EAU39140

Windshield

To remove the windshield

1. Insert the key into the windshield

lock, turn it clockwise and then re-
move the key.

2. Remove the windshield by push-

ing it forward, and then pulling it
upward as shown.

1. Helmet holding cable
2. Helmet

1. Key

2. Unlock.

U2C511E0.book Page 15 Friday, July 14, 2006 2:51 PM

Summary of Contents for Stratoliner





































































































Search results

Summary of Contents for Stratoliner

Reviews:

Related manuals for Stratoliner

Brands by name

Popular brands

Yamaha Stratoliner, Owner'S Manual

Search results

Summary of Contents for Stratoliner

Reviews:

Related manuals for Stratoliner

Brands by name

Popular brands