Yamaha Star XVS13AA(C) 2011, Service Manual

Page: 14 / 536

FEATURES
1-5
Trip F
→
Trip 1
→
Trip 2
→
Clock
→
Odo
→
Trip
F
TIP
Push the “ ” side of the “SELECT” switch to
switch the display in the reverse order.
To reset a tripmeter, select it by pushing the “ ”
or “ ” side of the “SELECT” switch, and then
push the “RESET” switch for at least one sec-
ond. If you do not reset the fuel reserve tripmeter
manually, it will reset itself automatically, and the
display will return to the prior mode after refuel-
ing and traveling 5 km (3 mi).
To set the clock:
1. Push the “ ” or “ ” side of the “SELECT”
switch to change the display to the clock
mode.
2. Push the “ ” side of the “SELECT” switch
and the “RESET” switch together for at least
two seconds.
3. When the hour digits start flashing, push the
“ ” or “ ” side of the “SELECT” switch to
set the hours.
4. Push the “RESET” switch, and the minute
digits will start flashing.
5. Push the “ ” or “ ” side of the “SELECT”
switch to set the minutes.
6. Push the “RESET” switch and then release it
to start the clock.
Self-diagnosis device
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If any of those circuits are not working correctly,
the engine trouble warning light will come on,
and then the odometer/tripmeter/clock display
will indicate a two-digit fault code.
If the odometer/tripmeter/clock display indicates
any fault codes, note the code number, and then
check the vehicle. Refer to “FUEL INJECTION
SYSTEM” on page 8-45.
NOTICE
ECA3D8A003
If the display indicates a fault code, the vehi-
cle should be checked as soon as possible
in order to avoid engine damage.
Brightness control mode
This function allows you to adjust the brightness
of the speedometer panel to suit the outside
lighting conditions.
To set the brightness:
1. Clock
1
1. Fault code display
1. Speedometer panel
2. Brightness level
1
1
2