Playing Bluetooth® Audio
STAGEPAS 1K Owner’s Manual
15
Playing Bluetooth
®
Audio
You can set up the STAGEPAS 1K so it will play audio files
stored in Bluetooth devices, such as a mobile device.
Registering (pairing) a Bluetooth
®
device
Before you can connect a Bluetooth device for the first
time, you need to “pair” the device. “Pairing” refers to
registering one Bluetooth device with another Bluetooth
device.
Once pairing is complete, you will be able to reconnect
those devices easily after you terminate a Bluetooth
connection.
1.
Make sure that the [BLUETOOTH PAIRING]
LED is turned off. If the LED is lit steadily or
is flashing, press the [BLUETOOTH
PAIRING] switch to place the Bluetooth
function in standby mode.
2.
Press and hold down the [BLUETOOTH
PAIRING] switch for three seconds or longer.
The [BLUETOOTH PAIRING]
LED will flash rapidly, indicating
that the unit is ready for pairing.
3.
Turn on the Bluetooth function on the
Bluetooth device that you want to pair.
For more information, refer to the owner’s manual for
the Bluetooth device.
4.
Once the Bluetooth device displays a list of
other Bluetooth devices that are available for
connection, select STAGEPAS 1K AUDIO.
NOTE
You can change the name of the unit in the Device Name
setting of STAGEPAS Editor.
When the pairing process is
complete, the Bluetooth
connection will be established
and the [BLUETOOTH PAIRING]
LED will light up.
NOTE
• The STAGEPAS 1K enables you to pair (register) up to eight
Bluetooth devices. Once the ninth Bluetooth device has been
paired successfully, the pairing information for the Bluetooth
device that was connected earliest will be deleted.
• You must complete the pairing process on the Bluetooth
device within two minutes.
Connecting a Bluetooth
®
device
1.
Press and hold down the [BLUETOOTH
PAIRING] switch for one second.
The [BLUETOOTH PAIRING] LED will flash slowly,
indicating that the unit is searching for a device.
2.
Turn on the Bluetooth function on the
Bluetooth device that you want to connect.
When the connection is made automatically, the
[BLUETOOTH PAIRING] LED will light up.
NOTE
Even if the STAGEPAS 1K is in Bluetooth standby mode (the
[BLUETOOTH PAIRING] LED is off), you can still connect your
Bluetooth device by following the steps below:
1.
Turn on the Bluetooth function on the
Bluetooth device that you want to connect.
2.
Select STAGEPAS 1K AUDIO from the list of
Bluetooth devices displayed on your
Bluetooth device.
Playing audio files stored in a
Bluetooth
®
device
You can use the STAGEPAS 1K to listen to an audio file
playing on your Bluetooth device.
Signals from the Bluetooth device are input to the ST
channel.
We recommend that you set the volume on the Bluetooth
device a little higher than normal, and then adjust the
volume for each channel using the ST [LEVEL] control.
Disconnecting the Bluetooth
®
device
To disconnect the Bluetooth device, do one of the
following:
• Use the Bluetooth device to disconnect. (The
[BLUETOOTH PAIRING] LED on the unit will flash
slowly, indicating that the unit now enters connection
search mode.)
• Press the [BLUETOOTH PAIRING] switch on the unit
to engage Bluetooth standby mode (The
[BLUETOOTH PAIRING] LED will turn off.)
Notice
Before you turn off the power to the unit, make sure that the
Bluetooth function is turned off. (Make sure that the
[BLUETOOTH PAIRING] LED is turned off.) If you turn off the
power to the unit while the Bluetooth function remains enabled,
the unit might lose the pairing information.
If you receive a call or text message while playing audio
files on your Bluetooth device such as a smartphone,
audio file playback might be paused momentarily.
To avoid this interruption, enable Airplane Mode, and
then set Bluetooth to ON on your Bluetooth device.
