Yamaha SH-01 Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 50

Yamaha SH-01 Owner'S Manual Download Page 12

12

About the SmartMedia

TM

Memory Cards

■

Using the SmartMedia Memory Cards

When using the memory cards, please carefully follow the points listed below.

Removing the Memory Card

After confirming that the SH-01 is not access-

ing* data in the memory card, grip the edge of

the card and pull firmly outward.

* The SH-01 accesses data from the memory card for

operations such as recording, playback, save, load,
format, delete, rename, etc. Also, the SH-01 will au-
tomatically access the memory card whenever a card
is inserted while the power is switched on in order
to determine the card’s type.

“DO NOT REMOVE CARD” appears in the display
when a memory card access operation is in progress.

* There are some instances where the SH-01 can not

recognize the memory card when the card is removed
and reinserted. In such an instance, turn the power
OFF and ON again (reset).

Never remove the memory card or
switch the SH-01’s power off while
any memory card-access operation
is in progress. Doing so may dam-
age the card itself and/or corrupt
data on the card as well as in the
SH-01 itself.

Formatting the Memory Card

Not all memory cards can be used as is. Before

any memory card is used with the SH-01, it

should be formatted (default) by the SH-01.

All data in the card is erased when the card is

formatted, so make sure that the card you want

to format does not contain any important data.

* Memory cards that are formatted by the SH-01 might

not work in any other devices.

●

Memory Card Compatibility

The SH-01 uses 3.3V (3V) SmartMedia memory

cards. 5V memory cards can not be used.

●

Memory Card Capacity

SmartMedia memory cards of any of the five

following memory capacities can be used in the

SH-01: 16MB/32MB/64MB/128MB.

●

Inserting and Removing the Memory

Cards

Inserting the Memory Card

Hold the card with the gold connectors facing

down, then carefully insert the card all of the

way into the memory card slot.

* Be careful not to insert the card the wrong way

around (upside-down, back-to-front).

* To prevent possible damage or abnormal operation,

make sure that dirt or other foreign objects do not
get into the memory card slot.

«
...
10
11
12
13
14
...
»

Summary of Contents for SH-01



















































Reviews:

No comments