STEP 1
STEP 2
Fig.3a
Fig.3b
11
12
1. Unlock two latches and remove Nose Cone.
2. Rubber seal must be fitted as shown and fully
lubricated with the supplied grease EVERYTIME before
replacing the nose cone.
STEP 2
Fig.3b
Explorer
CRUSHING HAZARD:
The following action during assembly, disassembly, and
transportation of the seascooter may incur crushing hazards
to your fingers or toes:
-Closing the nose cone latches
-Putting on the nose cone housing
-Placing the battery into the seascooter
-Accidental dropping of the seascooter or battery.
Silicone
Grease
Sealing
Surface
O-ring Seal
