background image

CAUTION

ELECTRICALLY OPERATED PRODUCT

Not recommended for children under 8 years of age. As with all

electrical products, precautions should be observed during handling

to reduce the risk of electric shock.

English Version

User Manual

SCOUT | SEAL | EXPLORER

Distributors in the United States and Canada provide a Standard Limited 

Warranty for 6 months from the date of purchase for new products. If you're 

not located in the United States or Canada, please contact your Local 

Distributor for warranty arrangements in your territory. Please visit 

www.seascooter.net for Distributor / Service Center details. Distributors ONLY 

warrant Yamaha Seascooter products purchased from an authorized dealer 

and with an original purchase receipt. All warranties are limited to a single 

original owner on the purchase of new and current product from an 

authorized reseller. Closeouts, Discontinued and Secondary sales of any kind 

including “like new” or out of box are not eligible for warranty consideration. 

This warranty gives the consumer specific legal rights, and those rights may 

vary from place to place. Ask your Local Distributor for the warranty period in 

your region by calling their Service Center. Any part of the product supplied 

by the Distributor and found in the reasonable judgment of the Distributor to 

be defective in material or workmanship will be repaired or replaced then 

returned by the Distributor without charging for parts and repair costs. The 

product including any defective part must be sent to the Distributor within the 

warranty period. The customer will pay for the expense of delivering the 

product to the Distributor. 

This warranty does not cover any product that has been subject to misuse 

negligence or accident, or that has been operated in any way contrary to the 

operating instructions as specified in the User Manual. Any flood, loss or 

damage, for any reason, that is caused by accidental release and sinking of 

the unit, or from flooding an o-ring sealed or water tight area will not be 

covered under warranty. This warranty does not apply to theft, loss, abuse or 

tampering, lack of maintenance, improper storage, exposure to excessive 

temperature, extended sunlight, material interactions, deteriorating chemicals 

or fumes, any damage to the product that is the result of improper 

maintenance or parts replacement performed by someone other than the 

official Distributor Service Center or to any product that has been altered or 

modified so as to change its intended use. This warranty does not extend to 

repairs made necessary by normal wear or by the use of parts or accessories 

which are either incompatible with the product or adversely affects its 

operation, performance or durability.

C O N S U M E R   W A R R A N T Y

&   S E RV I C E   I N F O R M AT I O N

SEE NEXT PAGE

Yamaha, the Crossed Tuning Fork Design, and any likeness thereof are trademarks 

of Yamaha Motor Corp. U.S.A. and Yamaha Motor Co., Ltd. (“Yamaha”) used 

under license by Sport Dimension Inc. www.yamaha-motor.com.  
This Product is not manufactured by Yamaha.  For consumer purposes, 

please contact Sport Dimension Inc. at 1-800-678-7873.

LICENSED PRODUCT

YMEP#18016 - V2

Summary of Contents for Seascooter Scout
















Reviews: