26
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following. If you are using Voice Editor for Windows, refer to the host
application's owner’s manual (online manual) too.
<Macintosh>
The printer port is not recognized.
•
The printer port will not be recognized if
AppleTalk is ON. Note that with some Macintosh
models, AppleTalk is automatically enabled when
starting up.
•
Verify that the “Printer” checkbox has been
checked in the OMS MIDI Setup window.
The modem port is not recognized.
•
On some Macintosh models such as the
Performa series, the modem port cannot be used
and only the printer port is available.
•
Verify that the “Modem” checkbox has been
checked in the OMS MIDI Setup window.
No MIDI In/Out data
Is the MIDI device’s "HostSelect" setting (UTILITY
PAGE 13) set correctly?
•
Make the correct setting according to the
instructions in your synthesizer's Owner’s
Manual.
•
In the OMS Port Setup, is MIDI In/Out set to
“unknown”? If you change the OMS ports or
setup, the OMS output ports have to be set
accordingly in Voice Editor’s OMS Port Setup
window. Choose the appropriate receiving
device.
•
Is OMS using the same port as that connected to
the cable? Open the OMS MIDI Setup window
and verify that the checkbox for the relevant port
has been checked.
•
If the port and setup assignments are frequently
altered, OMS may be unable to easily recognize
the serial port. Reboot the Macintosh, set up
OMS correctly, then start up Voice Editor.
Bulk data are not received.
•
Open the OMS Port Setup window and check
that the MIDI In has been properly assigned
.
•
Open the Editor Setup Dialog and check that the
Device No. has been properly assigned
.
Voice Editor does not start up when Library File
(extension .S6V) is double-clicked.
•
Change the Type/Creator settings for Library
Files as follows, then try double-clicking the file
again.
Type:
S6V_
Creator:
YS08
<Windows>
Bulk data is not received.
•
The MIDI In port in Editor Setup can be chosen
from the MIDI In ports in the settings of the host
application. Check the MIDI In settings in the
System Setup of the host application.
•
Open the Editor Setup Dialog and check that the
Device No. has been properly assigned
.
•
Depending on your host application, you may
need to set the application’s MIDI Thru port setting
to off.
MIDI Out port is not available in Editor Setup.
•
The MIDI Out port in Editor Setup can be chosen
from the MIDI Out ports in the setting of the host
application. Check the MIDI Out settings in the
System Setup of the host application.
<Windows / Macintosh>
Sound does not change when using knobs or
sliders.
•
Are the MIDI Out port and Device Number set
correctly in the Editor Setup?
Bulk data is not transmitted.
•
Are the MIDI Out port and Device Number set
correctly in the Editor Setup?
•
Is the Dump Interval in the Editor Setup too
short? Make sure the Dump Interval is at least 10
ms.
Sound is doubled when playing keyboard.
•
On your synthesizer, switch Local to OFF.
No sound heard when clicking on-screen
keyboard in Edit Window.
•
Is the MIDI Ch. set correctly in the Editor Setup?
Sound does not change when Monitor button is
pressed.
•
Are the MIDI Out port and Device No. set
correctly in the Editor Setup (OMS Port Setup)?
S08 Library files can’t be directly loaded to the
S08 from a Memory card.
•
The file name should included the extension
“.S6V”
