Yamaha RX10RTL, Owner'S Manual

Page: 89 / 99

9-2
2. Remove the shroud and the right side
cover. (See pages 8-5–8-7 for removal
procedures.)
3. Remove the red (+) connecting lead
from the lead holder and move it away
from the black (-) connecting lead.
CAUTION:
@
Be sure to connect the red (+) jumper
cable to the red (+) connecting lead and
the black (-) jumper cable to the black (-)
connecting lead. Do not reverse the
connections.
@
4. Pull the red (+) connecting lead cover
to expose the terminal through the slit
in the cover, and then connect the red
(+) jumper cable to the red (+) connect-
ing lead.
5. Connect the other end of the red (+)
jumper cable to the positive (+) terminal
of the booster battery.
6. Connect the black (-) jumper cable to
the negative (-) terminal of the booster
battery.
7. Pull the black (-) connecting lead cover
to expose the terminal through the slit
in the cover, and then connect the black
(-) jumper cable to the black (-) con-
necting lead.
U8FP10.book Page 2 Thursday, April 28, 2005 5:11 PM