Yamaha RX10RTL, Owner'S Manual

Page: 84 / 99

8-31
ESU04560
Replacing a headlight bulb
1. Remove the top cover. (See pages 8-5–8-7 for
removal procedures.)
2. Remove the screws, and then remove the headlight
access panel.
3. Disconnect the headlight coupler.
4. Remove the bulb holder cover.
5. Unhook the bulb holder by pushing it in, then clock-
wise.
1
Screw
2
Headlight access panel
3
Bulb holder cover
4
Bulb holder
6. Remove the bulb.
WARNING
@
Keep flammable products and your hands away from
the hot bulb until it has cooled down.
@
7. Install the new bulb, and then hook the bulb holder
onto the headlight unit.
8. Install the bulb holder cover, and then connect the
headlight coupler.
9. Install the headlight access panel and the top cover.
CAUTION:
@
Keep oil and your hands away from the glass part of
the bulb or its life and illumination will be affected.
If the glass is oil stained, thoroughly clean it with a
cloth moistened with alcohol or lacquer thinner.
@
Bulb type: 12 V, 60/55 W
U8FP10.book Page 31 Thursday, April 28, 2005 5:11 PM