47
English
Notes on input mode selection
•
To play back a source with the Dolby Digital (AC-3) decoded, set
the input mode to “AUTO”.
•
When you want to enjoy a source which has normal 2-channel
signals with a Dolby Pro Logic Surround program, select the
ANALOG mode.
•
In the AUTO mode, there may be a case depending on some LD
players or DVD players that when you make a search on a source
encoded with the Dolby Digital (AC-3) during the play and then
the play is restored, sound output is interrupted for a moment
because the digital input signal is selected again.
RECORDING A SOURCE TO
AUDIO/VIDEO TAPE (OR DUBBING
FROM A TAPE TO ANOTHER)
NOTE: If you will use the remote control unit, be sure to use it with
the lid open.
1. Set the REC OUT selector to the SOURCE position.
2. Select the source you want to record.
3. Play the source and increase the setting of the master VOLUME
control to confirm it. (For detailed information on tuning operations,
refer to page 49.)
4. Set the tape deck, MD recorder or VCR used for recording to the
recording mode.
Front panel
REC OUT/
ROOM 2 SELECTOR
VIDEO AUX
VCR 2
VCR 1
TV/DBS
DVD/LD
SOURCE
TAPE (MD)
TUNER
CD
PHONO
Front panel
or
Remote control
DVD/LD
VCR 1
TAPE (MD)
TV/DBS
DVD/LD
Front panel
or
Remote control
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
MASTER VOLUME
MUTE
