SETUP
Setting various functions (Setup menu)
En
106
■
Receiver operation via TV (HDMI Control)
HDMI Control
Set the HDMI Control function to “On” to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (e.g., Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit’s
functions, and to synchronize this unit with the operation of those
devices.
Refer to “Using the HDMI Control function” (
☞
p. 121
) for setting
instructions.
■
Selecting an HDMI OUT jack for the HDMI
Control function
Control Select
Select the HDMI OUT jack that utilizes the HDMI Control
function.
Refer to “Using the HDMI Control function” (
☞
p. 121
) for setting
instructions.
■
Listening to TV audio via single HDMI
cable (Audio Return Channel)
ARC (Audio Return Channel)
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV’s audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in “TV Audio Input.”
J
2
By means of this function, you do not need to connect the TV’s
audio output (digital audio output or analog audio output) to the
unit.
When the TV audio is input to the unit using Audio Return
Channel, “TV” is displayed on the front panel display.
■
Selecting an input source to assign audio
input for the TV
TV Audio Input
Select the input source that receives audio signals from TV while
the HDMI Control function is on.
When the TV is set to output sounds via this unit, the TV audio
input is automatically selected to the input source assigned
here.
J
2
TV1
TV2
Off
(Default)
Sets HDMI Control to “Off.”
On
Sets HDMI Control to “On.”
J
1
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
OUT1(TV1)
Applies the HDMI Control function for the HDMI
OUT 1 jack.
OUT2(TV2)
Applies the HDMI Control function for the HDMI
OUT 2 jack.
Off
(Default)
Sets the Audio Return Channel to “Off.”
On
Sets the Audio Return Channel to “On.”
•
“ARC (Audio Return Channel)” is enabled only for the HDMI
OUT 1 or 2 jack selected with “Control Select.”
•
Refer to “Single HDMI cable input to TV audio with Audio
Return Channel function” (
☞
p. 123
) for setting instructions.
SW
C
L
SL
SR
R
SBL
SBR
AV4
TV
VOL.
Audio input
AV1-6 or AUDIO1-2
Default setting
AV4
Audio input
AV1-6 or AUDIO1-2
Default setting
AV1
•
“TV Audio Input” is enabled only for the HDMI OUT 1 or 2 jack
selected with “Control Select.”
•
Refer to “Switching the input source on this unit automatically
when listening to TV audio” (
☞
p. 122
) for instructions.
J
1 :
When the HDMI Control is “On,” the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV. The HDMI input source can only be changed using the
remote control.
J
2 :
While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
Summary of Contents for RX-V867
Page 1: ...Owner s Manual AV Receiver English for U S A ...
Page 144: ... 2010 Yamaha Corporation YD000A0 OMEN ...
Page 161: ......
