Yamaha RX-V767 Owner'S Manual Download Page 108

Page: 108 / 128

108

APPENDIX

Troubleshooting

Tuner (FM/AM)

Problem

Cause

Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections.

Switch to monaural mode.

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference.

Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use

TUNING

to manually select the

station.

“No Presets” is

displayed.

No preset stations are registered.

preset stations before operation.

“Wrong Station” is

displayed.

An invalid FM/AM frequency has

been input.

Input a frequency that can be received.

—

Problem

Cause

Remedy

See

page

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak, or the antenna

connections are loose.

Adjust the AM loop antenna orientation.

Use the manual tuning method.

Automatic station

preset does not

work.

Automatic station preset is not

available for AM stations.

Use manual station preset.

Continuous

crackling and

hissing noises are

heard.

The supplied AM loop antenna is

not connected.

Connect the AM loop antenna correctly

even if you use an outdoor antenna.

The noises may be caused by

lightning, fluorescent lamps,

motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise,

but it can be reduced by installing and

properly grounding an outdoor AM antenna.

Buzzing and whining

noises are heard.

A TV set is being used nearby.

Move this unit away from the TV set.

—

Summary of Contents for RX-V767

































































































































Search results

Summary of Contents for RX-V767

Reviews:

Related manuals for RX-V767

Brands by name

Popular brands

Yamaha RX-V767, Owner'S Manual

Search results

Summary of Contents for RX-V767

Reviews:

Related manuals for RX-V767

Brands by name

Popular brands