SETUP
Setting various functions (Setup menu)
En
80
Configuration
Adjusts the output characteristics of the speakers based on
manually set parameters.
Front
Selects the size (sound reproduction capacity) of the front
speakers.
J
1
Center
Selects the size of the center speakers.
Surround
Selects the size of the surround speakers.
Surround Back
Selects the size of the surround back speakers.
Front Presence
Specify connection of front presence speakers.
In the “Configuration,” you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Woofer diameter
• 16 cm or larger
→
Large
• 16 cm or smaller
→
Small
Large
Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
Small
(Default)
Select this for small speakers. The subwoofer will
produce front channel low-frequency
components.
J
2
Large
Select this when a large center speaker is connected.
Small
(Default)
Select this when a small center speaker is connected.
None
Select this when there is no center speaker. The front
speakers will produce center channel audio.
Large
Select this when the surround speakers are large.
Small
(Default)
Select this when the surround speakers are small.
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
•
When set to “None,” no sound is produced from the surround
back speaker even if that speaker is connected.
•
When set to “None,” the sound programs will change to Virtual
CINEMA DSP mode.
Largex1
Select when one large surround back speaker is
connected.
Largex2
Select when two large surround back speakers are
connected.
Smallx1
Select when one small surround back speaker is
connected.
Smallx2
(Default)
Select when two small surround back speakers are
connected.
None
Select this when no surround back speakers are
connected.
•
When there are no surround speakers are connected, the setting
will automatically change to “None.”
•
You can set surround back audio signals, including from the
playback source, to be mixed down and produced from a single
speaker (6.1-channel layout) or produced from left and right
surround speakers (5.1-channel layout).
Use
(Default)
Select this when front presence speakers are
connected.
None
Select this when front presence speakers are not
connected.
J
1 :
When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.”
J
2 :
You can set the low-frequency components of audio signals transmitted from
the front speakers to the subwoofer by using “Bass Cross Over.”
