Yamaha RX-V473 Owner'S Manual Download Page 80

Page: 80 / 140

CONFIGURATIONS

➤

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

(power).

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press

(power) to set the unit to standby mode and turn it on again.

The new settings take effect.

ADVANCED SETUP menu items

Changing the speaker impedance setting (SP IMP.)

(U.S.A. and Canada models only)

Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.

Settings

Selecting the remote control ID (REMOTE ID)

Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.

Settings

ID1 (default), ID2

■

Changing the remote control ID of the remote control

Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.

Press CODE SET on the remote control using a pointed object, such as the tip of a
ballpoint pen.

Press SOURCE/RECEIVER.

Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).

Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.

If it blinks six times, registration failed. Repeat from Step 1.

• The registered remote control codes (p.82) are not cleared even if you change the remote control ID.

Configuring the system settings
(ADVANCED SETUP menu)

Item

Function

Page

SP IMP.

(U.S.A. and Canada models only)
Changes the speaker impedance setting.

REMOTE ID

Selects the unit’s remote control ID.

(Asia and General models only)
Changes the FM/AM tuning frequency setting.

TV FORMAT

Switches the video signal type of HDMI output.

INIT

Restores the default settings.

UPDATE

Updates the firmware.

VERSION

Checks the version of firmware currently installed on the unit.

(power)

STRAIGHT

PROGRAM

MIN

Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.

MIN (default)

Select this option when you connect 8-ohm or higher speakers to the
unit.

SPIMP.8MIN

REMOTEIDID1

Summary of Contents for RX-V473













































































































































Search results

Summary of Contents for RX-V473

Reviews:

Related manuals for RX-V473

Brands by name

Popular brands

Yamaha RX-V473, Owner'S Manual

Search results

Summary of Contents for RX-V473

Reviews:

Related manuals for RX-V473

Brands by name

Popular brands