PREPARATIONS
➤
Placing speakers
En
12
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
* RX-V573 only
• RX-V573 supports 2- to 7.1-channel system, and RX-V473 supports 2- to 5.1-channel speaker system.
1
Placing speakers
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6
Ω
MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6
Ω
.
Speaker type
Abbr.
Function
Speaker system (the number of channels)
7.1*
6.1*
5.1
4.1
3.1
2.1
Front (L)
1
Produce front right/left channel sounds (stereo sounds).
●
●
●
●
●
●
Front (R)
2
●
●
●
●
●
●
Center
3
Produces center channel sounds (such as movie dialogue and vocals).
●
●
●
●
Surround (L)
4
Produce surround right/left channel sounds.
●
●
●
●
Surround (R)
5
●
●
●
●
Surround back (L)*
6
Produce surround back left/right channel sounds.
●
Surround back (R)*
7
●
Surround back*
8
Produces sounds mixed from surround back left/right channel sounds.
●
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●
●
●
●
●
●
1
Speaker placement
2 3 4 5 6 7 8 9 10
Summary of Contents for RX-V473
Page 108: ...APPENDIX Index En 108 ZoneB Setup menu 69 ZoneB Trim Option menu 61 ...
Page 109: ... 2012 Yamaha Corporation YE161B0 EN ...
Page 135: ......
