Yamaha RX-V473, Owner'S Manual

Page: 21 / 140

PREPARATIONS
➤
Connecting a TV
En
21
3
Configure the settings for HDMI Control.
a
Enable HDMI Control on the TV and playback devices (such as a HDMI
Control-compatible BD/DVD player).
b
Turn off the TV’s main power and then turn off the unit and playback devices.
c
Turn on the unit and playback devices and then turn on the TV.
d
Switch the TV input to display video from the unit.
e
Check the following.
On the unit : The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV : The video from the playback device is displayed.
f
Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or
if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input”
(p.72) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.35),
you also need to change the input assignment for SCENE(TV).
■
Connection Method 3 (TV with HDMI input jacks)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys,
the TV audio will be played back on the unit.
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the
SCENE function (p.35), you also need to change the input assignment for SCENE(TV).
AV 1 AV 2 AV 3 AV 5 AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
( TV )
COMPONENT
VIDEO
P B
Y
VIDEO
A
O
AV 4
P
R
HDMI 1
(BD/DVD)
HDMI 2
HDMI OUT
ARC
FM
ANTENNA
AM
HDMI
HDMI HDMI
AV 4
(TV)
OPTICAL
OPTICAL
O O
HDMI OUT
ARC
The unit (rear) HDMI OUT jack
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
HDMI input
1 2 3
TV connection
4 5 6 7 8 9 10