17. NO MENU
1 7 . I n v a l i d i t y
18. IF STATUS (Input function status)
Not for service.
D S T : 7 1 0 E 0 F 2 3 9 0
19. BUS CHECK
Communication and bus line connection between devices on the DIGITAL P.C.B. are checked.
19-1. TI (DSP) BUS check
Communication and bus line connection between microprocessor (IC221) and TI (DSP, IC241) are checked.
OK:
No error detected.
NG:
An error is detected.
T I B U S : N o E r
E E P R O M B U S : O K
20. NO MENU
2 0 . I n v a l i d i t y
NoEr:
No error detected.
Boot:
When “Boot” is displayed for a few seconds or “Boot” and “NoEr” are displayed alternately, there is a
possibility that an error had occurred.
19-2. EEPROM BUS check
Communication and bus line connection between microprocessor (IC221) and EEPROM (IC222) are checked.
44
RX-V367/HTR-3063
RX-V367/HTR-3063
Summary of Contents for RX-V367
