22
En
Basic setup
6
Press
S
n
to select “SET” and then
S
l
/
h
to select the desired setting.
SET >CANCEL
Choices: SET,
CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press
U
MENU
to cancel the setup procedure.
7
Press
S
ENTER
to confirm your selection.
If you selected “SET” in step 6, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.
y
• Check the speaker connections (see page 5) and adjust the
“SPEAKERS” settings back in step 5, if necessary.
• The indicator of the speaker currently outputting the test
tone flashes in the front panel display.
8
Press
S
l
/
h
to select the desired setting.
Choices:
YES
, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
9
Press
S
ENTER
to confirm your selection.
• If you selected “YES” in step 8, the setup
procedure is completed and the display returns to
the top set menu display.
• If you selected “NO” in step 8, the front speaker
level adjustment display appears in the front panel
display.
10
Press
S
k
/
n
to select a speaker and then
S
l
/
h
to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press
h
to increase the value.
• Press
l
to decrease the value.
FR ----||----
• Select “FR” to adjust the balance between the front
left and right speakers.
• Select “C” to adjust the balance between the front
left and center speakers.
• Select “SL” to adjust the balance between the front
left and surround left speakers.
• Select “SR” to adjust the balance between the
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.
The available speaker channels differ depending on the
setting of the speakers.
11
Press
U
MENU
to exit from “BASIC SETUP”.
CHECK:TestTone
CHECK OK?
..YES
Note
