Yamaha RX-V3075, Owner'S Manual

Page: 21 / 169

PREPARATIONS
➤
Connecting speakers
En
21
❑
Front 5.1-channel system
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and creates the virtual surround speakers using the front
speakers to allow you to enjoy multi-channel surround sound (Virtual CINEMA DSP).
❑
2.1-channel system
Even when no surround speakers are connected, the unit creates the virtual surround
speakers using the front speakers to allow you to enjoy multi-channel surround sound
(Virtual CINEMA DSP).
• Add the center speaker to configure a 3.1-channel system.
■
Setting the speaker impedance
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6

MIN”. In this case, you can also
use 4-ohm speakers as the front speakers.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE
z
.
3
Check that “SPEAKER IMP.” is displayed on the front display.
4
Press STRAIGHT to select “6

MIN”.
5
Press MAIN ZONE
z
to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
MAIN ZONE
z
STRAIGHT
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
SBL PL SBR SB PR
SW1 SL SW2 SW SR
PL C L R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
8 M I N
S P E A K E R I M P .
1
Speaker connections
2 3 4 5 6 7 8 9