Yamaha RX-V2065BL, Owner'S Manual

Page: 69 / 114

65
En
Operating various settings for this unit (Setup menu)
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
MAC Address 1-10
Specify MAC addresses of network devices that are
permitted to access to this unit when “MAC Address
Filter” is set to “On”.
■
Network Standby
Selects whether or not to accept the commands via
network when this unit is on standby.
y
• When “Network Standby” is set to “On”, the amount of power
consumption in the standby mode increases.
■
Information
Displays the network parameters (IP address, etc.) or
vTuner ID assigned to this unit.
You can set your Rhapsody ® account.
For information about the Rhapsody
®
service and how to
play back Rhapsody
®
contents, see “Using the Rhapsody
®
service” (page 51).
■
Account Status
Displays the registration status of your Rhapsody
®
account. If “Not Available” appears, check the network
settings.
■
Sign In
Use this menu to register your Rhapsody
®
account with
your user name and password provided by Rhapsody ® . To
start registration, follow steps 3 and 4 in “Account setup
for Rhapsody
® ”(page 51).
If an error message appears (page 84), confirm your user
name and password and then try again.
■
Rhapsody Free Trial
Use this menu to subscribe to the Rhapsody ® service
using 30-day free trial. To subscribe to the free-trial
service, read the description on the GUI screen and then
select “Yes” if you accept the terms and conditions.
If you have subscribed to the free trial service, the
remaining service days and account number (required for
receiving Rhapsody
® support) appear on the GUI screen.
■
Remove Account
Removes your Rhapsody ® account.
Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters.
1
Press
j
Cursor
k
/
n
to select “DSP
Parameter” and then press
j
ENTER .
2
Press
j
Cursor
k
/
n
to select “Program
Name” and then press
j
Cursor
l
/
h
to
select a sound field program to edit.
3
Press
j
Cursor
k
/
n
to select a parameter to
edit and then press
j
Cursor
l
/
h
to
change the setting.
y
•
Repeat steps 2 and 3 to change other sound field program
parameters.
DSP Level
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust “DSP Level” as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→
Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→
Reduce the effect level.
On Permit access to this unit only from network
devices with the specified MAC addresses.
Choices: Off*, On
Off Not accept the commands via network.
On Accept the commands via network.
Rhapsody Information
DSP Parameter
To initialize the parameters of the selected sound field
program, press
j
Cursor
n
repeatedly to select
“Initialize” and then press
j
Cursor
h
. Then, press
j
Cursor
h
again to execute the initialization or
j
Cursor
l
to cancel it.
CINEMA DSP basic parameters
Adjustable range: –6dB to 0dB* to +3dB
Sci-Fi
PLIIx Movie
0dB
16ms
1.0
2ms
1.0
DSP Parameter
Program Name
Decode Type
DSP Level
P. Initial Delay
P. Room Size
Sur. Initial Delay
Sur. Room Size
Sound field parameters Set values
Sound field program