Yamaha RX-V2065BL Owner'S Manual Download Page 47

Page: 47 / 114

SIRIUS Satellite Radio™ tuning (U.S.A. model only)

English

INTR

ODUCTION

DITIONAL

INFORMA

ION

APPENDIX

PRE

ARA

ION

OPERA

ION

ANCED

OPERA

ION

Use this feature to display the SIRIUS Satellite Radio
information on the front panel display or on the GUI
screen.

Note

•

If a status message or an error message appears on the front panel display
or GUI screen, see “SIRIUS Satellite Radio” (page 81).

■

Front panel display

Press

INFO

(or

INFO

) repeatedly to toggle

the following SIRIUS Satellite Radio information
display modes.

Back to “

Channel

”

Display example (

Antenna

)

•

You can configure the scroll setting of the front panel display with “Front
Panel Display Scroll” in the Setup menu (page 63).

•

If the SIRIUS Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be displayed with a
space.

•

When the antenna of the SiriusConnect tuner cannot receive the signals,
“ACQUIRING” appears on the front panel display.

•

When an information is unavailable, “––––” appears.

■

GUI screen

Press

DISPLAY

on the remote control to turn

on or off the information display.

The following information is displayed on the GUI screen.

Channel number

Search mode (page 40)

Channel name, channel category, artist name,
song title, composer name

Antenna reception level

•

To hold or release the displayed information, press

ENTER

. While it

is held, the “HOLD” icon appears on the GUI screen..

Displaying the SIRIUS Satellite
Radio™ information

Channel

Channel number, channel name

Summary of Contents for RX-V2065BL



















































































































Search results

Summary of Contents for RX-V2065BL

Reviews:

Related manuals for RX-V2065BL

Brands by name

Popular brands

Yamaha RX-V2065BL, Owner'S Manual

Search results

Summary of Contents for RX-V2065BL

Reviews:

Related manuals for RX-V2065BL

Brands by name

Popular brands