Yamaha RX-V1077, Owner'S Manual

Page: 106 / 156

CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
106
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 38
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 108
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 108
Power Amp Assign Selects a speaker system. 108
Configuration
Front Selects the size of the front speakers. 109
Center Selects whether or not a center speaker is connected and its size. 109
Surround Selects whether or not surround speakers are connected and their size. 109
Surround Back Selects whether or not surround back speakers are connected and their size. 109
Front Presence Selects whether or not front presence speakers are connected. 109
Subwoofer Selects whether or not a subwoofer is connected and its phase. 110
Layout Selects a surround speaker layout when surround speakers are used. 110
Bass Cross Over Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 110
Distance Sets the distance between each speaker and listening position. 110
Level Adjusts the volume of each speaker. 110
Parametric EQ Adjusts the tone with an equalizer. 110
Test Tone Enables/disables the test tone output. 111
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 111
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 111
Adjustment Adjusts the delay between video and audio output manually. 112
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 112
Max Volume Sets the maximum volume to prevent excessive loudness. 112
Initial Volume Sets the initial volume for when this receiver is turned on. 112
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 112
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 112
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 112
Extended Surround Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. 113
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 113