Yamaha RX-V1000 Owner'S Manual Download Page 48

Page: 48 / 86

SET MENU

14 DISPLAY SET

■

BLUE BACK > AUTO/OFF

You can set the OSD background to blue if the video
source is not being reproduced (or the power of the
source component is off).

■

OSD SHIFT (OSD off-set position)

This setting is used to adjust the vertical position of the
OSD.

■

DIMMER

You can adjust the brightness of the front panel display.

15 MEMORY GUARD

Use this feature to prevent accidental changes to DSP
program parameter values and other settings on this unit.

Choices: ON, OFF
Initial setting: OFF

Select ON to protect the following features:
•

DSP program parameters

•

All SET MENU items

•

Center, rear, rear center (see page 17) speakers and
subwoofer levels

•

The on-screen display (OSD) mode

Notes

• When “15 MEMORY GUARD” is set to ON, you cannot use

the test tone.

• When “15 MEMORY GUARD” is set to ON, you cannot select

any other SET MENU items.

0107V1000_36-46_EN

8/29/0, 1:35 PM

Summary of Contents for RX-V1000























































































Search results

Summary of Contents for RX-V1000

Reviews:

Related manuals for RX-V1000

Brands by name

Popular brands

Yamaha RX-V1000, Owner'S Manual

Search results

Summary of Contents for RX-V1000

Reviews:

Related manuals for RX-V1000

Brands by name

Popular brands