manualshive.com logo in svg

Yamaha RX-A3060, Owner'S Manual

The Yamaha RX-A3060 is a premium audio receiver that delivers exceptional sound quality. Unlock its full potential by accessing the comprehensive owner's manual, available for free download at manualshive.com. Find all the necessary instructions and settings to optimize your audio experience with this powerful Yamaha receiver.

Share
Download
background image

En

165

No sound from the TV (when HDMI Control is used).

The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the TV audio is output from the 
speakers connected to the unit.

A TV that does not support ARC is connected to the unit only with an 
HDMI cable.

Use a digital optical cable to make an audio connection (p.41).

(If the TV is connected to the unit with an audio cable)

The TV audio input setting does not match the actual connection.

Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.140).

(If you are trying to use ARC)

ARC is disabled on the unit or TV.

Set “ARC” in the “Setup” menu to “On” (p.141). Also, enable ARC on the TV.

No sound from the Zone2 TV (connected to the unit 
with HDMI).

The audio output from the HDMI OUT 2 (ZONE OUT) jack is disabled.

Set “Audio Output” in the “Setup” menu to “On” (p.147).

Only the front speakers work on multichannel audio.

The playback device is set to output 2-channel audio (such as PCM) only.

To check it, use “Audio Signal” in the “Information” menu (p.151). If necessary, change 
the digital audio output setting on the playback device.

Noise/hum is heard.

The unit is too close to another digital or radio frequency device.

Move the unit further away from the device.

The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The sound is distorted.

The volume of the unit is too high.

Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to “Off” 
(p.150).

A device connected to the unit’s output jacks is not turned on.

Turn on all devices connected to the unit’s output jacks.

The sound is interrupted.

If the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2 or Zone4, HDMI 
audio output may be interrupted during some zone operations due to 
internal circuitry switching.

For details, see “Connecting an HDMI-compatible device to play back videos/audio” 
(p.106).

Problem

Cause

Remedy

Summary of Contents for RX-A3060







































































































































































































































Reviews:

No comments

Related manuals for RX-A3060

Icom 7100 Quick Start Manual preview
7100
Brand: Icom Pages: 5
Galaxy DX 949 Owner'S Manual preview
DX 949
Brand: Galaxy Pages: 12
Galaxy DX 929 Owner'S Manual preview
DX 929
Brand: Galaxy Pages: 11
Offshore 5801 User Manual preview
5801
Brand: Offshore Pages: 14
SOMFY 9018682 Installation Manual preview
9018682
Brand: SOMFY Pages: 24
Denver CAN-400 Instruction Manual preview
CAN-400
Brand: Denver Pages: 34
Denon AVR-X6200W Service Manual preview
AVR-X6200W
Brand: Denon Pages: 218
SAMCOM FPBN10A User Manual preview
FPBN10A
Brand: SAMCOM Pages: 16
Blaupunkt New Jersey MP68 Operating And Installation Manual preview
New Jersey MP68
Brand: Blaupunkt Pages: 74
Nav TV DSP12A-A2B Installation Manual preview
DSP12A-A2B
Brand: Nav TV Pages: 8
Teac CD-P800NT Release Notes preview
CD-P800NT
Brand: Teac Pages: 4
a-them AVM 60 Operating Manual preview
AVM 60
Brand: a-them Pages: 66
Adeunis RF sigfox RC4 PULSE V3 User Manual preview
sigfox RC4 PULSE V3
Brand: Adeunis RF Pages: 27
Yaesu FT-991 CAT Reference Book preview
FT-991 CAT
Brand: Yaesu Pages: 20
Green image GC-1009-4C3 Manual preview
GC-1009-4C3
Brand: Green image Pages: 3
V2 Wally2-230V Instruction Manual preview
Wally2-230V
Brand: V2 Pages: 6
Sirius Satellite Radio Starmate ST1 User Manual preview
Starmate ST1
Brand: Sirius Satellite Radio Pages: 36
LITEWAY LuxLink IRGT-1001 Operating Instructions preview
LuxLink IRGT-1001
Brand: LITEWAY Pages: 2

Brands by name

Popular brands

Load more brands